DXK21YAMDA-W — 1.75 Ton

Description

Powerful 1.75 Ton Hyper Inverter Cooling

The DXK21YAMDA-W 1.75 Ton Hyper Inverter AC is designed for users who need powerful cooling along with the flexibility of variable-capacity inverter technology.

Part of the Desert Xtreme Kooling (DXK) Hyper Inverter Series, this model combines a high-capacity DC inverter compressor with powerful airflow technologies to deliver cooling across changing room conditions.

The model has a nominal capacity of 1.75 Ton and can automatically adjust its cooling capacity from approximately 0.35 Ton to 1.95 Ton, allowing the AC to increase or reduce cooling according to demand.

AI-Enabled Auto Convertible Capacity

One of the key highlights of the DXK21YAMDA-W is its AI-Enabled Auto Convertible Capacity.

Instead of continuously operating at maximum capacity, the Hyper Inverter system can adjust cooling output according to the room’s cooling requirement.

The specified operating range of 0.35 Ton to 1.95 Ton provides flexibility for both lower cooling loads and higher cooling demand.

This technology is designed to help maintain comfortable temperatures while making better use of compressor capacity.

Up to 27.17 sq. m. Area Coverage

The supplied DXK catalog lists the DXK21YAMDA-W 1.75 Ton model with coverage of up to approximately 27.17 sq. m.

This makes it suitable for appropriately sized bedrooms, living rooms, offices and other spaces where a 1.75 Ton AC is appropriate.

Actual cooling coverage can vary depending on room dimensions, sunlight exposure, glass windows, insulation, ceiling height, occupancy and outdoor temperature.

DC Inverter Rotary Compressor

The DXK21YAMDA-W uses a DC Inverter Rotary Compressor with a Dual Driver Variable Frequency Drive.

The compressor can vary its operating speed according to the required cooling load. The 2026 specification lists a compressor operating range of approximately 8–120 RPM using the dual-driver controller.

The Hyper Inverter technology is designed to provide:

• Variable-capacity cooling
• More precise temperature control
• Lower vibration and noise
• Improved efficiency
• Reduced compressor wear
• Better performance at different cooling loads

The DXK catalog describes DC inverter technology as capable of modulating cooling capacity from low to full power according to demand.

145V–285V Wide Voltage Operation

The DXK21YAMDA-W supports a 145V–285V operating voltage range.

This wide-voltage capability makes the AC suitable for locations where voltage fluctuations are common. The Hyper Inverter system is designed to operate across this broad voltage range without requiring the AC to depend on a narrow voltage window.

55°C High-Ambient Cooling

Designed for demanding Indian summer conditions, the DXK21YAMDA-W is specified for operation at ambient temperatures up to 55°C.

This high-ambient capability is particularly useful in areas that experience very high summer temperatures.

16-Meter Long-Reach Airflow

The DXK21YAMDA-W provides up to 16 meters of long-reach airflow.

Its combination of Jet Flow Technology and wide horizontal louver is designed to push cool air farther into the room for better airflow reach and distribution.

The 2026 DXK Hyper Inverter specifications list 16 meters of long-reach airflow for the DXK21YAMDA-W.

3D Surround Cooling

The AC features 3D Air Flow and 3D Auto technology.

Vertical and horizontal louver movement allows the airflow direction to be controlled in multiple directions. The 3D Auto function automatically manages airflow direction and volume to support more uniform cooling.

This helps distribute cool air across different areas instead of concentrating airflow in one direction.

Jet Flow Technology

The Jet Flow Technology is designed to provide powerful and long-reaching airflow.

A wide horizontal louver and large blower design help move cool air farther across the room.

The DXK series uses airflow-channel design based on computational fluid dynamics principles to create a strong, uniform and long-distance airflow while aiming to minimize unnecessary power consumption.

Powerful Cooling Mode

When you need rapid cooling, the Powerful / Hi-Power Cooling Mode provides stronger airflow to help bring down the room temperature quickly.

This mode is useful when entering a hot room or when fast cooling is required during peak summer conditions.

PM2.5 Nano Air Filter

The DXK21YAMDA-W features an Anti-Viral Coated Pre Filter + PM2.5 Nano Air Filter.

The PM2.5 filter is designed to capture fine particulate matter, while the anti-viral coated pre-filter helps trap dust and microorganisms from the air passing through the indoor unit.

Clean Air Features

• PM2.5 Nano Air Filter
• Anti-Viral Coated Pre Filter
• Coarse Particle Filter
• Anti-Microbial Fan
• Particulate Matter filtration
• Cleaner indoor air circulation

Automatic Self-Clean Function

The Automatic Self-Clean Function helps maintain the indoor unit after cooling operation.

After switching off the AC, the self-clean process runs for approximately 30 seconds, helping dry the indoor unit and reduce moisture accumulation. This can help restrain mold growth inside the unit.

Anti-Corrosive Blue Fin Protection

The outdoor heat exchanger comes with Anti-Corrosive Blue Fin Coils + Bends.

The protective coating is designed to help protect the heat exchanger from moisture, humidity and corrosive environmental conditions.

This helps support long-term durability and maintain heat-exchange performance.

R32 Refrigerant

The DXK21YAMDA-W uses R32 refrigerant for cooling operation.

3 Star Energy Rating

The DXK21YAMDA-W carries a 3 Star BEE rating for 2026.

The 2026 specification lists an ISEER of 4.43, making this model part of the higher-rated Hyper Inverter range.

Unique Selling Points (USPs)

1. 1.75 Ton Hyper Inverter

High-capacity variable-speed cooling for suitable medium-to-large spaces.

2. 0.35–1.95 Ton Auto Convertible Capacity

The AC can automatically adjust its cooling capacity according to demand.

3. AI-Enabled Auto Convertible Capacity

Designed to automatically adapt cooling output according to changing room conditions and cooling requirements.

4. 3 Star BEE Rating — 2026

Energy-efficiency rating of 3 Star for 2026.

5. 4.43 ISEER

The model has a catalog-listed ISEER of 4.43.

6. 145V–285V Wide Voltage

Designed to operate across a broad voltage range, making it useful in areas with voltage fluctuations.

7. 55°C High-Ambient Cooling

Designed for operation in temperatures up to 55°C.

8. 16m Long-Reach Airflow

Jet Flow Technology provides long-distance airflow of up to 16 meters.

9. 3D Surround Cooling

Vertical and horizontal louver control helps distribute cool air across the room.

10. 3D Auto Airflow

Automatic airflow control helps create more uniform cooling.

11. DC Inverter Rotary Compressor

Variable-speed compressor technology adjusts cooling capacity according to demand.

12. Jet Flow Technology

Designed for powerful, quick and long-reach cooling.

13. PM2.5 Nano Air Filter

Designed to filter fine PM2.5 particles from circulating air.

14. Anti-Viral Coated Pre Filter

Helps trap dust and microorganisms suspended in the air.

15. Automatic Self-Clean

Approximately 30-second automatic drying operation helps reduce moisture buildup inside the indoor unit.

16. Anti-Corrosive Blue Fin

Helps protect outdoor coils and bends against corrosion.

17. R32 Refrigerant

Uses R32 refrigerant for cooling.

18. Stabilizer-Free Operation

The model is listed with stabilizer-free operation, supported by its wide voltage operating range.

Key Specifications

Specification	Details
Model	DXK21YAMDA-W
Capacity	1.75 Ton
Convertible Capacity	0.35–1.95 Ton
AC Type	Hyper Inverter Split AC
Operation	Cooling Only
BEE Rating	3 Star (2026)
ISEER	4.43
Compressor	DC Inverter Rotary Compressor
VFD	Dual Driver Variable Frequency Drive
Compressor Speed	8–120 RPM
Ambient Operation	Up to 55°C
Voltage Range	145V–285V
Maximum Cooling Capacity	6,890W
Rated Cooling Capacity	6,100W
50% Load Cooling	3,050W
Rated Power Consumption	1,755W
50% Load Power Consumption	638W
Refrigerant	R32
Area Coverage	Up to 27.17 sq. m.
Long-Reach Airflow	Up to 16 meters
Indoor Airflow	1080 CMH
Airflow Control	3D + 3D Auto
Air Filter	Anti-Viral Coated Pre Filter + PM2.5 Filter
Blower Fan	Anti-Microbial Fan
Indoor Unit Size	295 × 1000 × 230 mm
Outdoor Unit Size	645 × 810 × 301 mm
Indoor Unit Weight	11 kg
Outdoor Unit Weight	29 kg
Indoor Sound Level	49 / 45 / 42 / 36 dB
Coil Protection	Anti-Corrosive Blue Fin Coils + Bends
Self-Clean	Automatic Self-Clean Function
Power Supply	1 Phase, 220/230V, 50Hz